Training & Certificates

In the 21st century, advancing your career requires advancing your skillset. The RELLIS Academic Alliance offers next-training and certifications in a variety of in-demand skills. Choose a program from the list below to find out details on the training and how to register. Get started today!

WHERE TO REGISTER

Classes near Blinn College

Blinn College – Post Office Center
301 Post Office St
Bryan, TX 77802
979-830-4339 becky.krebs@blinn.edu

Courses are held at the following locations, but registration is not available on-site:

Workforce Education Training Center
5503 Raymond Stotzer Pkwy
College Station, TX 77845

Blinn College Health Science Center
8447 Hwy 47
Bryan, Texas 77807

The myTEEX Student Portal is a system for online registration. If you haven’t set up a myTEEX Student Portal account, see our FAQ page for information about the myTEEX Student portal and how to set up an account.
Below are the steps you will be taken through as part of the registration process through the myTEEX Student portal.

  • If you click Register for a course and it sends you to the myTEEX Student portal, you must first log into the myTEEX Student portal. 
  • Once logged in, the course you selected will appear in the window. If correct, click Continue.
  • Complete / Verify your Personal Information. Click Continue when done. 
  • You will then go to the final payment screen.  Enter in the applicable payment information and click Finish when complete.
  • Once complete, you will see a Confirmation screen on the myTEEX Student portal. You can click Start Course at this time. You will also receive a confirmation email to the email tied to your account. 

More details about registration for TEEX courses can be found here.

Physical Address

1885 FLIGHT LINE DRIVE, BRYAN, TX 77807

Email address

cdltraining@rctacdl.org

Phone number

(979) 985-3111

REGISTRATION FAQs

Payment is required at the time of registration. Registration without payment does not hold a student’s spot in class.

In the event a course is canceled by Blinn, a full refund will be given to the student. Students will be notified of course cancellation three (3) business days before the start date.

To receive a full refund, the student must notify the Division of Applied Technology, Workforce, and Economic Development 48 business hours (or 2 business days) before the course start date. Other withdrawals will result in prorated refunds per the following:

  • For classes that meet less than four (4) times:
    • A 50% refund will be given with less than 48 business hours cancellation
    • No refund will be given after the first class
  • For classes that meet four (4) to eight (8) times:
    • An 80% refund will be given before the second-class day
    • No refund will be given after the second class
  • For classes that meet more than eight (8) times:
    • An 80% refund will be given before the second class
    • A 50% refund will be given before the third class
    • No refund will be available after the third class
  • Refunds require a minimum of six (6) weeks to process. Students will not receive a refund immediately.

Training & Certificates

In the 21st century, advancing your career requires advancing your skillset. The RELLIS Academic Alliance offers next-training and certifications in a variety of in-demand skills. Choose a program from the list below to find out details on the training and how to register. Get started today!

Offered By

Blinn College District

Overview

The Carpentry Program includes 200 contact hours of skills training and assignments covering basic rigging; building materials, fasteners, and adhesives; Hand and power tools; Construction drawings, specification, and layout; floor system; wall systems; ceiling and roof framing; building envelope systems; basic stair layout.

Program / Award Options

Carpentry Certificate Level I: A 24- credit hour program prepares students for entry-level positions.

Carpentry Certificate Level II: A 42- credit hour program that includes the Level 1 Certificate courses and provides additional training in roof, interior finish, and wall systems and includes management training.

Associate of Applied Science in Carpentry: A 60- Credit hour program that builds upon the Level I and II certificates, prepares students for higher-wage positions, and transfers to bachelor’s degree programs.

Occupational Skills Award in Carpentry: This Award provides entry-level skills for students seeking work as a general construction carpenter. 

Job Outlook

Employment of carpenters is projected to grow 2 percent from 2020 to 2030. About 89,300 openings for carpenters are projected each year, on average, over the decade. Carpenters earn a median salary of $49,520 per year (www.bls.gov/ooh/)

 

Offered By

Blinn College District

Overview

The Construction Management Program prepares students for High-demand, high-wage jobs in construction management. Additionally, Students receive hands-on instruction in construction planning and design, scheduling, budgeting, personnel management, quality assurance, and safety. The Program Follows NCCER curriculum for fundamentals of crew leadership, project supervision, and project management.

Program / Award Options

Associate of Applied Science in Construction Management: 60- Credit hour program that builds upon the Level I and II certificates, prepares students for higher-wage positions, and follows NCCER curriculum for fundamentals of crew leadership, project supervision, and project management. 

Certificate Level I in Construction Management: A 24-credit hour program that prepares students for entry-level jobs in construction management.

Certificate Level II in Construction Management: A 48 Credit hour program that includes the level I certificate courses and provides additional training in safety program management, residential and light commercial construction drawings, and an internship opportunity.  

Occupational Skills Award in Construction Management: This award provides entry-level skills for students seeking work as an entry-level construction manager. 

Job Outlook

Employment of construction managers is projected to grow 11 percent from 2020 to 2030, faster than the average of all occupations. About 38,900 openings for construction managers are projected each year, on average, over the decade. Construction managers earn a median salary of $97,180 per year. (www.bls.gov.ooh/)

 

Offered By

Texas A&M Commerce & The Institute For Cyber Threat Defense

Overview

The RELLIS Cybersecurity and Emerging Technologies Academy is a partnership between The Texas A&M University System and the Institute for Cyber Threat Defense (ICTD). The Academy provides training in the areas of cybersecurity, artificial intelligence, machine learning, and emerging technologies. The partnership leverages the relationships and expertise of ICTD’s instructors, who come from private industry, the intelligence community, military special operations forces, law enforcement, and academia.

Programs

Registered Apprenticeship Programs: These programs are approved by the U.S. Department of Labor providing participants with an industry-driven, high-quality career pathway, formal instruction, and a portable, nationally recognized credential. Upon successful completion of the pre-apprentice training, the apprentice moves to the job site as an employee. 

Cyber Analyst Certificate Program: This is a one-year program taught in an online format specifically designed to teach cybersecurity and emerging technology. This course is taught by instructors with real-world experience and government expertise, preparing students for their transition into a fast-paced cybersecurity workforce. About half of the course engages in cybersecurity operations

Employer Opportunities: The academy offers certificates and apprenticeships tailored to the needs of your organization with partners in the RELLIS Academic Alliance. Through the Academy, employers can obtain a skilled workforce satisfying their specific needs.

For More Information

contact: Eduardo Monarez

email: emonarez@rellis.tamus.edu

 

Offered By
Blinn College District

Overview
The Facility Maintenance Program offers a variety of awards designed to prepare students for entry-level facility maintenance positions, including college credit degree plans that place students on the pathway to higher wage positions in the industry. Students in the program receive training in entry-level carpentry, HVAC, plumbing, and electrical skills for maintaining commercial and industrial buildings.

Program / Award Options

Associates in Facility Maintenance: A 60-credit hour program that builds upon the Level I and II certificates, while preparing students for higher-wage positions, and transfers to bachelor’s degree programs.

Facility Maintenance Certificate Level I: A 24-credit hour program that prepares students for entry-level facility maintenance positions.

Facility Maintenance Certificate Level II: A 39-credit hour program that includes the Level I Certificate courses and provides additional training in plumbing codes, blueprint reading, piping standards, and heating. 

Occupational Skills Award in Facility maintenance: This award provides entry-level skills for students seeking work as a skilled facility maintenance technician. 

Job Outlook

Employment of general maintenance and repair workers is projected to grow 8 percent from 2020 to 2030. About 152,300 openings for general maintenance and repair workers are projected each year, on average, over the decade. General maintenance and repair workers earn a median salary of $40,850 per year. (www.bls.gov/ooh/)

 

 

Offered By

Blinn College District

Overview

HVAC Program offers a variety of awards designed to prepare students for entry-level HVAC positions, including college credit degree plans that place students on the pathway to higher-wage positions in the industry. In the program students receive training in the fundamentals of heating, ventilation, and air conditioning; safety; residential and commercial applications; heat pumps; and Environmental Protection Agency recovery certification.

Program / Award Options

HVAC Certificate Level I: A 24 Credit hour program that prepares students for entry-level HVAC positions.

HVAC Certificate Level II: A 42 credit hour program that includes the level I certificate courses and provides additional training in industrial mathematics, electrical calculations, and the National Electrical Code.

Associate of Applied Science in HVAC: A 60- Credit hour program that builds upon the Level I and II certificates, prepares students for higher-wage positions, and transfers to bachelor’s degree programs.  

Occupational Skills Award in HVAC: This award provides entry-level skills for students seeking work as a entry-level HVAC specialist.

Job Outlook

Employment of heating, air conditioning, and refrigeration mechanics and installers is projected to grow 5 perfect from 2020 to 2030. About 38,599 openings for heating, air conditioning, and refrigeration mechanics and installers are projected each year, on average, over the decade. HVAC professionals earn a median salary of $48,630 per year. (www.bls.gov/ooh/)

 

Offered By
Blinn College District

Overview
The Plumbing Program includes a 10-hour construction training course covering OSHA standards, policies, and procedures in the construction industry. Topics include scope and application of the standards, construction safety and health principles, and special emphasis on those areas in construction which are most hazardous. Additionally, it also includes over 200 contact hours of skills training and assessments covering basic safety; construction math, hand tools, power tools, construction drawings, basic rigging; introductory plumbing; plumbing tools; plumbing math; plumbing drawings; plastic pipe and fittings; copper tube and fittings; cast iron pipe and fittings; steel pipe and fittings; plumbing fixtures; drain, waste, and vent systems; and water distribution systems.

Offered By

Blinn College District

Overview

The Power Line Worker Program provided students both theory and practical hands-on experience in all phases of power line construction and maintenance. Students will gain knowledge and skills in electrical math, national electrical safety codes, construction of overhead and underground distribution systems, conductor applications, overvoltage and under-current protection, guying and pole grounding.

Program / Award Options (Blinn College)

Power Line Worker Certificate Level I: A 24-credit hour program prepares students for entry-level water purification positions

Power Line Worker Certificate Level II: A 45-credit hour program includes the Level I certificate courses and provides additional training in, electrical power distribution, OSHA regulations within the construction industry, and electrical theory and devices.

Associate in Power Line Worker: A 60- Credit hour program that builds upon the Level I and II certificates, prepares students for higher-wage positions, and transfers to bachelor’s degree programs.  

Occupational Skills Award in Power Line Worker: This award provides entry-level skills for students seeking work as a entry-level power line worker.

Job Outlook

About 23,300 openings for line installers and repairers are projected each year, on average, over the decade. Electrical power line installers and repairers earn a median salary of $74,530 per year. (www.bls.gov/ooh/)

Offered By

Blinn College District / RCTA

Overview

The CDL Truck Driving Program prepares students to earn your commercial driver’s license and begin a new, high-demand career. Through the two concurrent courses, students will learn to conduct pre-trip, on-the-road, and post-trip vehicle and equipment inspections and gain skills in map reading, managing logbooks and cargo documentation, dispatch procedures, emergency responsibilities, and transportation agency regulations.

Program

Pre-Class Requirements: 6 step process

  1. Pass a DOT Physical.
  2. Study for a Class A CDL Permit.
  3. Schedule an appointment with DPS to take the appropriate tests required to obtain your Class A learners permit.
  4. If you have not already done so, complete the Blinn Student Enrollment Form available at www.blinn.edu/truck-driving or available at RCTA at the in-person initial contact interview or anytime during normal operating hours or by special arrangements.
  5. Again, if you have not already done so, pay your tuition of $5,500 for the Commercial Driver Skills Training Course.
  6. Bring your valid driver’s license and your valid permit, as your permit is only valid when accompanied by your valid driver’s license. Also bring your DOT medical card, with you to your assigned first day of class in the Commercial Driver Skills Training Class, provide it to an RCTA instructor, and be prepared to take your first official DOT Drug Screen which will be recorded in the FMCSA Drug and Alcohol Clearinghouse. Also, be prepared to jump right in with both feet ready to learn on day one.

 

Offered By

Blinn College District

Overview

The Surveying Technician program provides students training in collecting, manipulating, formatting, and mapping geospatial data.

Program / Award Options

Certificate Level -1 in Surveying: A 30- credit hour program that will train students for entry level jobs in the field of study

Certificate Level – 2 in Surveying: A 45- credit hour program that includes the Level 1 Certificate courses and provides additional training in land surveying applications, along with an internship study. 

Associate of Applied Science in Surveying: A 60- Credit hour program that builds upon the Level I and II certificates, prepares students for higher-wage positions, and transfers to bachelor’s degree programs.

Occupational Skills Award in Surveying: This award provides entry-level skills for students seeking work as a entry-level surveyor. 

Job Outlook

Employment of surveying and mapping technicians is projected to grow 4 percent from 2020 to 2030. About 7,000 openings for surveying and mapping technicians are projected each year, on average, over the decade. Surveying and mapping technicians earn a median salary of $46,910 per year. (www.bls.gov/ooh/)

 

 

Offered by

Blinn College District

Overview

Students in the program receive training in monitoring and operating the system of machines included in the transfer and treatment of water or wastewater while gaining knowledge in electrical math, national electrical safety codes, construction of overhead and underground distribution systems, conductor applications, overvoltage and under-current protection, guying, and pole grounding. 

Program / Award Options

Certificate Level-I in Water Purification (CWP): This 24-credit hour program prepares students for entry-level water purification positions

Certificate Level II in Water Purification (CWP): This 42-credit hour program includes the Level I certificate courses and provides additional instruction in wastewater treatment.

Associate of Applied Science in Water Purification (CWP): This 60-credit hour program builds upon the Level I and II certificates and prepares students for management positions and transfers to bachelor’s degree programs. 

Occupational Skills Award in Water Purification (CWP): This Award provides entry-level skills for students seeking work as a skilled clean water professional. 

Job Outlook

About 10,500 openings for water and wastewater treatment plant and system operators are projected each year, on average, over the decade. Water and wastewater treatment plant and system operators earn a median salary of $47,880 per year. (www.bls.gov/ooh/)

 

 

Offered By

Blinn College District

Overview

The welding technology program offers competency based training in welding technology for student by including entry-level to advanced level welding processes such as, shielding metal arc welding (SMAW), gas metal arc welding (GMAW, gas tungsten arc welding (GTAW), flux cored arc welding (FCAW) basic metallurgy, and inspection procedures based on industry welding codes. 

Program / Award Options

Certificate Level- 1 in Welding Technology: The two-semester program provides students a working knowledge in the field and teaches the procedures most commonly used in the industry today. 

Certificate Level- 2 in Welding Technology: The three-semester program includes Level I certificate content, testing and inspection systems, pipe welding, and includes an internship. 

Associate of Applied Science in Welding Technology: This four-semester program provides the knowledge and skills to work with modern industrial welding equipment using advanced techniques. 

Occupational Skills in Welding Technology: The two-semester program provides students a working knowledge in the field and teaches the procedures most commonly used in the industry today. 

Job Outlook

Employment of welders, cutters, solderers, and brazers is projected to grow 8 percent from 2020 to 2030, about as fast as the average of all occupations. About 49,200 openings for welders, cutters, soldereres, and brazers are projected each year, on average, over the decade. Welders earn a median salary of $47,010 per year. (www.bls.gov/ooh/)

 

HOW TO REGISTER

Prerequisites

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

STEP ONE

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

STEP TWO

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

STEP THREE

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

STEP FOUR

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

WHERE TO REGISTER

Classes near Blinn College

Blinn College – Post Office Center
301 Post Office St
Bryan, TX 77802
979-830-4339 becky.krebs@blinn.edu

Courses are held at the following locations, but registration is not available on-site:

Workforce Education Training Center
5503 Raymond Stotzer Pkwy
College Station, TX 77845

Blinn College Health Science Center
8447 Hwy 47
Bryan, Texas 77807

The myTEEX Student Portal is a system for online registration. If you haven’t set up a myTEEX Student Portal account, see our FAQ page for information about the myTEEX Student portal and how to set up an account.
Below are the steps you will be taken through as part of the registration process through the myTEEX Student portal.

  • If you click Register for a course and it sends you to the myTEEX Student portal, you must first log into the myTEEX Student portal. 
  • Once logged in, the course you selected will appear in the window. If correct, click Continue.
  • Complete / Verify your Personal Information. Click Continue when done. 
  • You will then go to the final payment screen.  Enter in the applicable payment information and click Finish when complete.
  • Once complete, you will see a Confirmation screen on the myTEEX Student portal. You can click Start Course at this time. You will also receive a confirmation email to the email tied to your account. 

More details about registration for TEEX courses can be found here.

Physical Address

1885 FLIGHT LINE DRIVE, BRYAN, TX 77807

Email address

cdltraining@rctacdl.org

Phone number

(979) 985-3111

REGISTRATION FAQs

Payment is required at the time of registration. Registration without payment does not hold a student’s spot in class.

In the event a course is canceled by Blinn, a full refund will be given to the student. Students will be notified of course cancellation three (3) business days before the start date.

To receive a full refund, the student must notify the Division of Applied Technology, Workforce, and Economic Development 48 business hours (or 2 business days) before the course start date. Other withdrawals will result in prorated refunds per the following:

  • For classes that meet less than four (4) times:
    • A 50% refund will be given with less than 48 business hours cancellation
    • No refund will be given after the first class
  • For classes that meet four (4) to eight (8) times:
    • An 80% refund will be given before the second-class day
    • No refund will be given after the second class
  • For classes that meet more than eight (8) times:
    • An 80% refund will be given before the second class
    • A 50% refund will be given before the third class
    • No refund will be available after the third class
  • Refunds require a minimum of six (6) weeks to process. Students will not receive a refund immediately.

START BUILDING YOUR FUTURE

We’re here to help! If you have questions about the application process, a specific degree program, or anything else, simply fill out the form and we’ll get back to you as soon as possible.

xxxxxxxxxx (no dashes or spaces)

Format: 20xx

*Program pending THECB and/or SACSCOC approval

      



START BUILDING YOUR FUTURE

We’re here to help! If you have questions about the application process, a specific degree program, or anything else, simply fill out the form and we’ll get back to you as soon as possible.